Quick Summary
A house extension cost varies widely across the UK, so the most useful starting point is the house extension cost per square metre of new floor area. Single-storey rear extensions usually cost less per square metre than double-storey work. Treat any single figure with caution and test it against a builder's quote using your own drawings.
- Single-storey extensions are usually cheaper per square metre than double-storey work, since they need less structure.
- Resi's published case study gives an indicative range of around £1,500 to £2,500 per square metre for comparable rear extensions.
- Confirm whether your builder's price includes design work, since many do not.
- Ask architects and structural engineers for a fixed fee against a defined scope.
- Plan for party wall agreement costs, temporary accommodation, skip hire and a contingency fund.
Table of Contents
- What a House Extension Really Costs Per Square Metre
- Single-Storey Versus Double-Storey: How the Numbers Differ
- Planning Permission and Building Regulations Fees
- Architect and Structural Engineer Fees to Budget For
- Party Wall Agreement Costs and Other Hidden Expenses
- VAT, Financing and Payment Schedules to Plan For
- Requesting a Clear Quote for Your Extension Project
- Frequently Asked Questions
What a House Extension Really Costs Per Square Metre
Most homeowners ask about the house extension cost per square metre first, and it is the most useful starting point for a rough budget. Rates for house extensions in the UK vary widely by region, specification and site conditions, so treat any single figure with caution. The best way to test a budget is to ask a builder for a quote against your own drawings.

A common approach is to estimate per square metre of new floor area, then adjust for the scope of work. Quality of finish, ground conditions, access and the level of glazing all move the figure.
Because costs differ so much between houses, the Royal Institution of Chartered Surveyors advises seeking professional advice early rather than relying on averages. RICS guidance on home extensions and improvements
Quick check: before you compare quotes, confirm that each builder has priced the same floor area, specification and exclusions.
Single-Storey Versus Double-Storey: How the Numbers Differ
A single-storey extension is usually the simpler and cheaper route because the structure is lower, the roof work is more contained and there is no staircase or first-floor structure to build. A double-storey extension adds floor area on the same footprint, but it brings higher structural loads, more complex roof work, a staircase and longer build times. The cost per square metre therefore often differs between the two, even though the footprint is identical.
As a broad pattern, single-storey rear extensions tend to cost less per square metre than double-storey work, because the same foundations and roof must support two floors. Resi's published case study of a rear extension gives an indicative range of around £1,500 to £2,500 per square metre for comparable rear extensions, and notes that larger projects can take about a year. Resi case study on a rear extension
| Extension type | Typical scope | Main cost drivers | Typical build time |
|---|---|---|---|
| Single-storey | Ground-floor rear or side extension | Foundations, roof, glazing, drainage diversions | Shorter, often a few months |
| Double-storey | Ground and first floor | Structural loads, steel beams, roof, staircase, upper-floor finishes | Longer, often up to a year |
The gap between the two is not simply double the single-storey price. Foundations, drainage and roof are shared costs, so the second storey adds less than a full single-storey extension would. Conversely, a double-storey scheme may require more temporary works, scaffolding and party wall involvement, which can narrow the saving. We would not treat these categories as fixed quotes; they are a way to see which costs will move if you change the scope.
Planning Permission and Building Regulations Fees
Many extensions fall under permitted development, but not all of them. Whether you need planning permission depends on the size, height, position and the property itself. You should check with your local council before committing to a design. Building regulations are separate from planning, and they apply to structure, fire safety, energy efficiency and ventilation regardless of whether planning permission is needed.
Fees for planning applications and building control inspections vary by local authority. Ask your builder or architect to confirm the current charges with your council, and check the official guidance on the UK government's planning portal. UK government planning portal guidance on house extensions
Watch out: if the work starts before building control signs off the key stages, you may face remedial work later, which costs more than getting the inspections right first time.
Architect and Structural Engineer Fees to Budget For
Professional fees are a separate line in your budget and are routinely underestimated. An architect prepares drawings, submits planning applications and can manage the tender process; a structural engineer calculates beams, foundations and loadings so the new work is safe and buildable. Some builders include design work in their price, but many do not, so confirm what is included before you compare quotes.
Architect and structural engineer fees vary by region, practice size and scope of work, so request a written fee for your own project before comparing quotes.
Ask each professional for a fixed fee against a defined scope, rather than an open-ended hourly rate. A clear scope should state how many site visits are included, who submits the planning application, whether the architect will administer the building contract, and whether the structural engineer will provide calculations for building control. Where the scope is vague, the fee will drift.
Watch out: if the architect's fee excludes building regulations drawings or structural calculations, you may find yourself paying twice for information the builder needs to price the job accurately.
RIBA guidance on appointing an architect and fee structures
Party Wall Agreement Costs and Other Hidden Expenses
If your extension works on or near a shared boundary, you may need a Party Wall Agreement under the Party Wall etc. Act 1996. The agreement protects both owners and sets out how the work is carried out. Costs depend on whether the neighbour agrees informally, or whether surveyors must be appointed to act for each side, so budget for the possibility of both. UK government guidance on the Party Wall etc. Act 1996
Other hidden costs include temporary accommodation if the kitchen or bathroom is out of use, skip hire, utility connections and a contingency fund. It is worth holding a contingency in reserve for unforeseen ground or structural problems.
VAT, Financing and Payment Schedules to Plan For
VAT is a point many homeowners overlook. Construction work on an existing home is often charged at the standard rate, but certain residential works can qualify for reduced rates, so ask your builder how VAT applies to your project before you agree a price. HMRC guidance on VAT for building work
On financing, decide early how you will pay. A typical arrangement uses staged payments tied to completed milestones, rather than large upfront sums. Avoid paying the full amount before work is finished, and make sure your payment schedule matches the progress you can verify on site.
Requesting a Clear Quote for Your Extension Project
A useful quote itemises materials, labour, professional fees, VAT, exclusions and the contingency you have agreed. Compare quotes on the same drawings and specification, not on headline figures alone. If a quote looks unusually low, ask what has been left out.
At Thane, we provide clear, detailed quotes, and each project is run by a dedicated project manager so you have one point of contact. Our team holds CSCS certification and carries public liability and employer's insurance. To discuss your extension, request a free quote from Thane or contact the Thane team directly.
Last Updated: 19 November 2026
Frequently Asked Questions
How much does a house extension cost per square metre in the UK?
Costs vary widely by region, specification and site conditions, so no single figure applies to every project. Per square metre rates depend on the finish level, ground conditions and whether the work involves structural alterations. The most reliable way to compare costs is to request an itemised quote for your own plans from a qualified builder or contractor. Thane provides clear, detailed quotes, and current pricing details are on the Thane pricing page.
Do I need planning permission for a house extension?
Many single-storey rear extensions fall under permitted development rights, but these have limits on size, height and proximity to boundaries, and they do not apply in every case. Conservation areas, listed buildings and properties with previous restrictions can need full planning permission. Planning fees are set by local authorities, so check your council's current charges before committing to a design. Building regulations approval is a separate requirement and applies to most extensions regardless of planning status. Your project manager can help confirm which route applies to your property before work begins.
How much should I budget for professional fees when extending a house?
Professional fees for a house extension commonly include an architect or designer, a structural engineer for structural calculations, and sometimes a planning consultant or party wall surveyor. Fees vary with project size and complexity, so ask for a fixed fee or clear hourly rate in writing before instructing anyone. Including these costs in your overall budget from the start prevents surprises later. Structural engineering matters most where walls are removed or new openings are created. Thane offers a dedicated project manager so you have one point of contact throughout the process.
What factors influence the total cost of a home extension?
The main factors are the size and design of the extension, ground conditions and foundation requirements, the choice of materials and finish, access to the site, and the level of structural work needed. Labour and material prices also change over time, and contingency funds help cover unexpected problems found once work starts. Planning, building control and party wall requirements add to the total. A detailed site survey and clear specification at the outset make the budget more reliable. Expertise in London and the Home Counties includes understanding local geological and planning requirements, which can affect cost.